^BroadbandcorDECT-NG uses the same platform as ^BroadbandcorDECT and with upgraded Radio access equipment providing data rates of up to 2 Mbps per subscriber, while continued to support all the services for voice and data. Also ^BroadbandcorDECT-NG system provides Non-Line of sight installations, enabling nomadic subscriber terminals. The CPEs can optionally be used as a WiFi Access Point or GSM/3G Femto Base Station with Wireless IP backhaul supporting Fixed Mobile Convergence. Both ^BroadbandcorDECT and ^BroadbandcorDECT-NG system uses 20 MHz spectrum mostly allocated in many countries for DECT radio operation.

^BroadbandcorDECT-NG system supports an enhanced Air Interface to provide up to 2 Mbps data rate per CPE. The network is now upgraded to be end-to-end IP centric. The exchange-end sub-system consists of the (optional) corVAN-NG that provides an Ethernet Interface towards Base Station Aggregators (BSA).

BSA replaces the BXD of the ^BroadbandcorDECT system. BSA is now an outdoor mount system, installed at the base of the tower, and connects to multiple tower top NG Base Stations (NBS). BSA interfaces with the corVAN-NG on Ethernet links.

The NG Base Station (NBS) of the ^BroadbandcorDECT-NG system uses the same DECT spectrum, but also uses higher level modulation schemes such as 16-QAM and 64-QAM to achieve even better spectral efficiency. In addition, the NBS capability is enhanced to operate on multiple carriers to achieve manifold down link and uplink Bandwidth. Improved link margin and enhanced algorithm allows Non-Line of Sight deployment.

Base Station Aggregator (BSA)

The Base Station Aggregator (BSA) of the ^BroadbandcorDECT-NG and SNAP! system is designed to be outdoor/indoor mounted (typically at the bottom of the tower). The BSA provides a high speed data link over fiber or copper to the Base Stations on tower top. BSA is modular in architecture supporting multi technology Radio Base Stations and wide scale of subscriber base. BSA also can be configured to provide ASN gateway functionality. This allows the BSA to be directly connected to the Internet Backbone. This allows small-scale data network deployment.

Base Station

The Base Stations of the ^BroadbandcorDECT-NG is a compact weather-proof outdoor units which are mounted on tower-top, and are compliant to NEMA and IP ratings for outdoor mounting. Providing the Base Stations on tower-top reduces the RF Cable length from the Antenna to the Base Station saving both cost and loss in the RF cable. ^BroadbandcorDECT-NG Base Station and subscriber terminals employ Adaptive Modulation schemes up to 64 QAM that provide up to six times the basic DECT data rate. The Base Station deployment is typically done as multi sector coverage on a tower (cell-site). Each cell-site contains 1 or 2 Base Stations which provide sectored coverage around it and if required a DECT wireless backhaul can be supported to work with remote BSA. 1:2 Frequency re-use is supported in cluster deployments with no two adjacent sectors utilizing the same frequency.

• Compliant to DECT IMT2000
• Operates in frequency band of 1880 –1930 MHz and any 3G spectrum band, supporting channel size of up to 5 MHz
• Toll-Quality Voice and Always on 2 Mbps Broadband Triple Play Data Services to users
• Supports NLOS deployment for fast rollout
• Supports Fixed and Nomadic mobility
• Acts as a stand-alone switch providing comprehensive suite of switching functions for 5,000 subscribers, providing R2MF/SS7 interface towards the parent exchange
• Acts as an Access Network transparently extending all the features and services provided by the Local Exchange using V5.2 protocol
• Standard Two-wire Interface at the Subscriber Unit provides, G3 Fax, MODEM, Home Meter, CCB, etc.
• GUI-OMC Console for user friendly operations and maintenance
• Comprehensive EMS providing all FCAPS management function and also interfaces to operators NMS
• Transparently supports Facsimile, Voiceband modems, IVRS and Pre-paid billing services
• Variants of the subscriber terminal supports WiFi AP or GSM Femto Base Station application for Fixed Mobile Convergence application in addition to the Ethernet port